It is wise to use folding beds when you are living in a dorm room, a small room, or another small space. When they are not in use, you can fold them up, so you can save some space when not in use, which is why they are often kept for guests. It is interesting to note that when a folding twin bed is folded up, it only requires 6 square feet of space. It is essential to use strong materials when building a folding bed, such as oak, in order to make it durable. There are many furniture applications using oak wood, including folding beds, as it is a sturdy wood that can be used in many different ways.
The following steps should be followed:Â
- The two boards that measure 77 inches long should be positioned on edge so they are parallel and 35 inches apart from one another. The two 35-inch boards should be positioned perpendicular to each other such that they are also on edge and 75 inches apart from each other. The frame should measure 77 by 37 inches. Drill 3/32-inch screw holes in both 77- and 35-inch boards before you start painting. On the 77-inch boards, drill 3 holes 1/2-inch from each 10-inch end, and on the 35-inch boards, drill 3 holes 1/2-inch from the center. Three inches should be the spacing between the holes. Using 12 3-inch screws, secure the boards together. Each screwing application in this project should be pre-drilled with 3/32-inch holes.
- Using the 24 2-inch screws, attach the plywood to the frame by laying it on top of the frame. Screws should be 9 inches apart and placed into the 1/2-inch middle of the frame’s edges. Your mattress will be held by this.
- Place the two 39-inch boards 77 inches apart, vertically parallel, and in a straight line. After aligning the 79-inch board’s corners with those of the other two boards in Step 1, screw the 79-inch board to the 39-inch boards. Apply 6 screws to this project. It will support the frame of your mattress.
- Position the mattress frame so that one of its 77-inch boards is where it rests vertically. Lift one end up and put a dowel 2 inches from a corner underneath the frame. Follow the same steps on the reverse side. The 10-inch board should be centred beneath and parallel to the dowels.
- The 79-inch board should be 1 inch above the frame when the 39-inch boards are positioned around it. The margins of both sets of boards should be flush with one another. Drill a 1-inch hole through both the frame’s 35-inch and 39-inch boards. The hole must be 2 inches above the bottom of the 39-inch board, parallel to the 77-inch boards, and spaced 2 inches from the plywood on the frame. To align the two holes, repeat this procedure on the other side. To join the two pieces of wood together, insert a 2-inch dowel into each of these holes. Once the dowels beneath it are taken out, the mattress frame should easily fold down horizontally.
- The bed should be folded up so that it is vertical. Drill two 1-inch holes into the 77-inch board on the mattress frame and through the 79-inch board. Both boards’ 5-inch centres and their ends should have holes placed at 6-inch intervals. To keep the frame in this upright position, insert the 4-inch dowels into the holes.
- In order for the screws to enter the 77-inch board, fasten the 76-inch board to the plywood’s top edge. With its end 1/2-inch away from each 37-inch side of the plywood, this board should be flush with the top edge of the frame. The final four 2-inch screws should be used and spaced 18 inches apart. When folded down, it will make sure that your bed is level.
- Make use of your medium- and fine-grade sandpaper to smooth out the entire job. Apply your wood stain after cleaning it with your tack cloth. Place your mattress inside the folding bed frame when it has had time to dry.
The following are some common types:
Folding bed in chest
The alternative is to build a bed that collapses into a chest designed in the style of the Middle Ages, which is ideal for sitting on while not in use but is a little trickier and fancier. Although this is a beautiful piece of furniture, it appears to require more advanced construction abilities. Are you up for the task? A comprehensive instruction is available on the 3D Woodworking Plans website.
Furniture with Multiple Uses
There are numerous DIY projects available for you if you like the notion of having multipurpose furniture in your home. This couch that doubles as a workstation is one truly cool design. That’s it! You can also check folding sofa bed price if you don’t have time to build a folding sofa here; we review some items.